Mr.Steam C1250
CU Series 30kW Steam Shower Generator Package w/CU1250
The Mr.Steam C1250 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 1250 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 30kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, and Solenoid Valve.
See Shipping Tab
With the rugged 30kW CU1250 steam generator at its heart, the new Mr. Steam C1250 commercial steam bath generator package is engineered for around-the-clock use in the most demanding commercial steam showers. This 30-kilowatt pressurized steam generator is designed for one or two steam rooms with dimensions up to 1250 cubic feet (CF).
The high-performance, low-maintenance C1250 features a durable and corrosion-resistant stainless-steel outer casing. The unit is vertically built to fit compact mechanical rooms for easy installation and maintenance.
The C1250 commercial steam generator includes a National Board recognized pressure vessel wrapped in insulation for efficient operation and features a 30-kilowatt stainless-steel heating element. All CU Series units are pre-tested and delivered factory-wired to assure that each unit is working perfectly.
Mr. Steam CU Series generators operate well under pressure and are designed to provide years of safe and reliable operation. The Mr. Steam C1250 is UL-listed, ASME-certified and CSA-certified to ensure safety and quality.
The unit comes with a pressure gauge and sight glass which allows facility operators to view operation information at a glance. The generator features an auxiliary manual reset, low-water cutoff for added safety.
The MrSteam C1250 steam room boiler includes an Automatic Blowdown System which performs daily cleansing of the generator tank to prevent harmful sediment buildup. Additionally, we recommend an effective water treatment system to help ensure the longevity of the unit.
The unit requires the use of the included Digital 1 control package for operation which allows facility operators to pre-set room temperatures and provides consistent steam production. The package includes a factory-installed digital 1 control with a sensor cover, Aromasteam Steam head, and a steam solenoid. The AromaSteam steam head allows you to infuse essential aroma oils into the steam shower.
The Mr. Steam C1250 is available in 208V, 240V, and 480V three-phase (3-PH) configurations.
All Mr. Steam generators are designed, engineered, and assembled in the USA.
SteamSaunaBath is proud to be an authorized Mr. Steam partner and offer the full line of Mr. Steam products and parts.
We guarantee the lowest price. If you see a lower price advertised for this item elsewhere, give us a call!
SteamSaunaBath is the bathing environment experts. We specialize in steam room and sauna design, sales, installation, maintenance, and repair services. Our half-century of hands-on experience means that we are uniquely qualified to ensure the success of your bathing space and an unparalleled steam bathing experience. To contact a SteamSaunaBath Bathing Specialist, call: (800) 707-2862.
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr. Steam's AromaFlo aromatic oil delivery system
- Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
- Auxiliary Manual Reset
- Independent manual Reset
- Back low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Steam Bath Generator 30"L x 20"W x 38"H
- Installation and Operation Manual
- Limited Warranty
| Model | C1250 |
|---|---|
| Minimum Cubic Feet | 1001 CF |
| Maximum Cubit Feet | 1250 CF |
| Kilowatt Rating (kW) | 30 kW |
| Shipping Weight (Lbs.) | 250 lbs |
| Water Supply Connection | 1/4" NPT |
| Generator Steam Line Connection | 1" NPT |
| Steam Head Connection | 3/4" NPT |
| Drain Connection | 1" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve PSIG | 15 PSIG |
| Control 'Rough In' Cut Out | 3-1/2" x 3-1/2" |
| Control Sensor Cable | 30' 5'.25' 2 Conductor, 24 AWG, Shielded Cable |
| Control Sensor 'Rough In' Cut Out | 3/8" Diameter |
| Generator Control Connection | 6 Position Terminal Block |
| Generator Control Cable | 6' Long, 4 Conductors, 16 AWG |
| Width In Inches | 20" |
| Depth In Inches | 30" |
| Height In Inches | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
The step-down transformer is used to supply the 120V control circuit.
The step-down transformer is used to supply the 120V control circuit.
This CU SteamStop emergency stop switch electronically shuts down the steam generator and initiates the Digital 1 internal alarm and the CU Alarm, if installed.
This audible alarm sounds in the event the steam room maximum set temperature is exceeded or the CU SteamStop switch is pressed.
High temperature limit device for use with any Mr Steam CT or CU steam generator system to provide temperature shutoff and alarm functions.
The Mr.Steam LEDLITE was designed with precise attention to detail and crafted with aluminum bezels for durability. You won't need to worry about temperature levels or moisture with this low-voltage LED recessed light. The dimmable feature matched with an impressive 600 lumens gives you the ability to have your lighting match your mood.
The boiler-mounted Mr. Steam CU1-Digital1 room temperature control allows facility operators to set and maintain a 100-120-degree steam room temperature range. The CU1-Digital 1 includes a Digital 1 Operating Control with a sensor guard, a ¾” Steam Solenoid Valve, a ¾” Steam Head and operates with the Mr. Steam CU360-CU1400 steam room boilers. The Mr. Steam CU1-Digital1 is for new boilers only, to upgrade your F1 control, see the CU-104066 Field Kit.
This 30-Minute Mechanical Count-Down Timer w/Steam Vent works in conjunction with Digital 1 Control Package.
The optional Mr.Steam CU-BDT-ASME36 Blowdown Tank meets ASME code and is designed to safely augment the blowdown process.