Installation
Learn more about Installation Materials
Mapelastic AquaDefense Waterproofing Membrane, 5-Gallon SSL-T573 $351.95 Fitting Package for AK, AT, 3K and 3T Series Dual Systems FIT-209 $154.95 ComfortFlo Steam Head, Amerec CFSH $84.00 Polished Chrome Brushed Nickel(+$14.00) Polished Brass(+$14.00) Polished Nickel(+$14.00) Oil Rubbed Bronze(+$28.00) Drain Pan, Amerec ADP $77.00 Warm Start Control Switch (not needed w/ K200i), Amerec WS $63.00 Polished Chrome Brushed Nickel Oil Rubbed Bronze Polished Brass Cable, AG, AK, DC Switch 8-Pin 100', Amerec 5304-06
Product Specifications
Model
AK20
Minimum Adjusted Cubic Feet
726
Maximum Adjusted Cubic Feet
900
Kilowatt Rating (KW)
2 Generators, 10 KW Each
Shipping Weight (Lbs.)
2 Generators, 27 lbs Each
AC Voltage
2 Generators, 240V AC Each
DC Voltage
5V DC
Phase
Single Phase
Nominal Amperage
2 Generators, 41.5 Amps Each
Recommended Protective Device
2 Circuits, 60 Amp Each
Recommended Minimum Copper Wire Supply
2 Circuits, 6 AWG Each
Water Supply Connection
2 Connections, 3/8" NPT Each
Generator Steam Line Connection
2 Connections, 1/2" NPT Each
Steam Head Connection
2 Connections, 1/2" NPT Each
Drain Connection
2 Connections, 1/2" NPT Each
Safety Relief Valve Connection
2 Connections, 3/4" NPT Each
Safety Relief Valve PSIG
2 Valves, 10 PSIG Each
Control "Rough In" Cut Out
2-3/8" Diameter
Control Sensor Cable
25', 2 Conductor, 22 AWG, Shielded Cable
Control Sensor "Rough In" Cut Out
7/8" Diameter
Generator Control Connection
8 Pin, Snap-In Connector
Generator Control Cable
25', 8 Conductor, 28 AWG, Shielded Cable
Multiple Generator Interconnecting Cable
25', 8 Conductor, 28 AWG, Shielded Cable
Width In Inches
2 Generators, 16-1/2" Each
Depth In Inches
2 Generators, 6-1/4" Each
Height In Inches
2 Generators, 13" Each
Back to Top