Amerec AK6

AK Series 6KW Steam Shower Generator

Model
AK6
SKU
9014-123

The Amerec AK6 is a 6kW home steam shower generator designed for residential steam baths with dimensions up to 150 adjusted cubic feet (ACF).

Required control package sold separately.

MSRP
$2,695.00
Your Price
$1,490.00

If you see a lower price on the Amerec AK6 steam generator, call us, and we'll match it, plus 10% of the difference!

 

The Amerec AK6 is designed for home and day spa steam baths with dimensions up to 150 adjusted cubic feet (ACF).

Designed and engineered to provide the most consistent steam production and temperature consistency for each bathing experience. Using a Sequential Temperature Control to ensure no unexpected temperature variations by providing an even flow of soft steam gives you the most enjoyable experience.

The AK6 steam shower generator includes a stainless-steel tank, industrial-grade heating elements, modular snap-in control connections, durable electronics, an electronic water level control system, and several other innovative features to give you the best quality bathing experience.

Amerec AK Series steam generators are built to power the most demanding home and commercial steam rooms. The Amerec AK6’s stainless steel tank and water level probes provide years of exceptional performance and worry-free operation. The AK6 steamer is equipped with removable heating elements for easy and economical service. 

Health clubs, day spas, and homeowners rely on Amerec AK residential steam shower generators for low cost, efficiency and reliable daily use. The AK6 6kW steam generator is available in 240V or 208V and can be field wired for single-phase or three-phase configurations. The compact steam shower unit can be conveniently installed in vanities, cabinets, and other out of sight locations.

Amerec AK series generators have the flexibility to be linked in tandem to accommodate steam rooms larger than 550 adjusted cubic feet. Connection cables are sold separately, and each generator requires a ComfortFlo steam head.

The Amerec AK6 generator requires the available K3 control for operation which regulate bathing duration and temperature, or the R30K 30-minute timer. Each control package includes a matching finish ComfortFlo steam head.

We recommend the available Amerec Automatic Drain System with your AK6 steam generator. The Auto Drain System automatically drains the generator tank after each use to help prevent calcification and lime build-up and ensure the optimal performance of the unit.
 
The Amerec AK-6 steam bath generator carries a limited lifetime warranty and is fully serviceable. Amerec AK Series steam shower generators are ETL listed to ensure your safety.

SteamSaunaBath is the bathing environment expert. We specialize in steam room and sauna design, sales, installation, maintenance, and repair services. Our half-century of hands-on experience means that we are uniquely qualified to ensure the success of your bathing space and an unparalleled steam bathing experience. Contact a SteamSaunaBath technical bathing specialist to help you build your steam room: (800) 707-2862.

  • Sequential temperature control for soft steam
  • Stainless steel tank
  • Industrial grade, serviceable heating elements
  • Durable electronic components
  • Electronic water-level control system
  • Low voltage safety control circuits
  • Available Auto Drain automatic draining system
  • Ability to field wire phase for 1-phase or 3-phase
  • Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
  • Full 3/4" port drain valve
  • ASME safety valve
  • UL/CSA/CE listed
  • 6kW steam bath generator
  • Installation and operation manual
  • Limited warranty
Swipe horizontally to reveal full table content.
Model AK6
Minimum Adjusted Cubic Feet 80
Maximum Adjusted Cubic Feet 150
Shipping Weight (Lbs.) 35lbs
Kilowatt Rating (KW) 6 KW
Water Supply Connection 3/8” Compression Connection
Generator Steam Line Connection 1/2” NPT
Steam Head Connection 1/2” NPT
Drain Connection 3/4" NPT
Safety Relief Valve Connection 3/4" NPT
Safety Relief Valve PSIG 10 PSIG
Control "Rough In" Cut Out 2-3/8” Diameter
Generator Control Connection 8 Pin, Snap-In Connector
Generator Control Cable 25', 8 Conductor, 28 AWG, Shielded Cable
Control Sensor "Rough In" Cut Out 7/8" Diameter
Control Sensor Cable 25', 2 Conductor, 22 AWG, Shielded Cable
Width In Inches 16-1/2”
Depth In Inches 6-1/4”
Height In Inches 15”
Required for Operation
K2 Operating Equipment Package, AK Series
Model
Glacier
SKU
9036-156

Glacier K2 Operating Equipment Package for AK Series Generators. Includes steam head.

MSRP
$1,705.00
Your Price
$1,193.50

K3 Operating Equipment Package, AK Series
Model
Columbia
SKU
9036-116

Columbia K3 Operating Equipment Package for AK Series Generators. Includes steam head.

 

MSRP
$1,645.00
Your Price
$1,151.50

K2 Digital Control Package, AK Series
Model
K2
SKU
9114-106

The Amerec K2 steam shower generator control kit works with Amerec AK series steam generators. Wi-Fi and Smart home ready, this control features adjustable time, temperature and a 24 hour delay and includes a ComfortFlo steam head. 

6 different Trim Ring/Steam head finishes for the K2 control are available.

 

MSRP
$990.00
Your Price
$693.00

K3 Digital Steam Shower Generator Control Kit, AK Series
Model
K3
SKU
9114-126

The Amerec K3 steam shower generator control kit works with Amerec AK series steam generators. This control kit is able to be mounted inside or outside the steam room and features a digital control, remote sensor and includes a ComfortFlo steam head.

6 different Steam head finishes for the K3 control kit are available.

MSRP
$860.00
Your Price
$602.00

KT3 Digital Steam Shower Generator Control Kit, AK Series
Model
KT3
SKU
9114-136

The Amerec KT3 steam shower generator control kit works with Amerec AK series steam generators. A stylish update to Amerec's KT60 control, the control is backward compatible with the classic KT60. Featuring a built-in temperature sensor, this control was designed for use inside the steam room. With the simple ease of 3-buttons, you control on/off, temperature, and time duration settings. The display alternates every 5 seconds between atmospheric room temperature and the remaining time of your steam session. With maximum session settings of up to 125 °F and 60 minutes (residential use), this control kit includes a ComfortFlo steam head.

6 different Steam head finishes for the KT3 control kit are available.

MSRP
$840.00
Your Price
$588.00

K4 On/Off Non-Thermostatic Control, AK Series
Model
K4
SKU
9114-147

The Amerec K4 steam shower generator control kit works with Amerec AK-series steam bath generators. This control kit may be mounted inside or outside the steam room and features a non-thermostatic control and includes a ComfortFlo steam head.

Choose from 6 available designer finishes for the ComfortFlo steam head.

MSRP
$330.00
Your Price
$231.00