Amerec AK7.5

AK Series 7.5kW Steam Shower Generator

Model
AK7.5
SKU
9014-125

The 7.5kW Amerec AK7.5 home steam shower generator is engineered for residential and day spa steam baths up to 200 adjusted cubic feet (ACF).

Required control package sold separately.

MSRP
$2,875.00
Your Price
$1,588.00

If you see a lower price on the Amerec AK7.5 steam generator, call us, and we'll match it, plus 10% of the difference!

 

The Amerec AK7.5 is engineered for home and day spa steam baths up to 200 adjusted cubic feet (ACF).

Designed and constructed of corrosion-resistant stainless-steel, the Amerec AK7.5 steam shower generator provides years of dependable, worry-free operation. The AK7.5 includes professional-grade heating elements, modular snap-in control connections, durable electronic components and parts, electronic water level control system, and a variety of other innovative features.

Amerec AK Series steam generators are designed to provide the most consistent steam production and temperature for a relaxing steam bath. The AK 7.5 uses a Sequential Temperature Control which provides a consistent flow of soft steam without unexpected temperature variations, to make your bathing experience a relaxing escape.

The AK7.5 steam shower unit is equipped with removable heating elements for easy and economical service. The Amerec AK7.5 steamer’s stainless-steel tank and water probes deliver long-lasting strength and durability that you can count on.

Homeowners, health clubs, and day spas rely on Amerec AK Series steam generators for long-lasting safety, reliability, and efficiency.

The Amerec AK7.5 7.5kW steam generator is available in 240Vor 208Vand can be field wired for single-phase or three-phase (PH) configurations to meet all your needs.

The Amerec AK7.5 generator requires the available K3 control for operation which regulate bathing duration and temperature, or the R30K 30-minute timer. Each control package comes with a matching finish ComfortFlo steam head.

We recommend the available Amerec ADK Automatic Drain System with your AK7.5 steam unit which drains the generator tank after each use to help prevent calcification and lime build-up of the unit.

Amerec AK Series generators can be linked together to heat steam shower enclosures larger than 550 cubic feet, to meet all your steam shower size needs. Connection cables are sold separately, and each generator requires a ComfortFlo steam head.

The Amerec AK7.5 steam bath generator carries a limited lifetime warranty and is fully serviceable. All Amerec steam room generators are UL, CSA, and CE listed for your safety.

SteamSaunaBath is proud to be an authorized Amerec partner and offer the best steam showers from Amerec for homes and health clubs.

We guarantee the lowest price. If you see Amerec steam showers for sale at a lower price, give us a call, we’ll beat it! See our guaranteed price policy for details.

SteamSaunaBath is the bathing environment expert. We specialize in steam room and sauna design, sales, installation, maintenance, and repair services. Our half-century of hands-on experience means that we are uniquely qualified to ensure the success of your bathing space and an unparalleled steam bathing experience. Contact a SteamSaunaBath technical bathing specialist to help you build your steam room: (800) 707-2862.

  • Sequential temperature control for consistent flow
  • Stainless steel tank
  • Industrial grade, serviceable heating elements
  • Durable electronic components
  • Electronic water-level control system
  • Low voltage safety control circuits
  • Available Auto Drain automatic draining system
  • Ability to field wire for 1-phase or 3-phase phase
  • Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
  • Operates with inside/outside shower, on/off, time/temperature controls
  • Full 3/4" port drain valve
  • ASME safety valve
  • UL/CSA/CE listed
  • 7.5KW steam bath generator
  • Installation and operation manual
  • Limited warranty
Swipe horizontally to reveal full table content.
Model AK7.5
Minimum Adjusted Cubic Feet 80
Maximum Adjusted Cubic Feet 200
Kilowatt Rating (KW) 7.5 KW
Shipping Weight (Lbs.) 35 lbs
AC Voltage 240V AC
DC Voltage 5V DC
Phase Single Phase
Nominal Amperage 31 Amps
Recommended Protective Device 40 Amp
Recommended Minimum Copper Wire Supply 8 AWG
Water Supply Connection 3/8" NPT
Generator Steam Line Connection 1/2" NPT
Steam Head Connection 1/2" NPT
Drain Connection 3/4" NPT
Safety Relief Valve Connection 3/4" NPT
Safety Relief Valve PSIG 10 PSIG
Control "Rough In" Cut Out 2-3/8" Diameter
Control Sensor Cable 25', 2 Conductor, 22 AWG, Shielded Cable
Control Sensor "Rough In" Cut Out 7/8" Diameter
Generator Control Connection 8 Pin, Snap-In Connector
Generator Control Cable 25', 8 Conductor, 28 AWG, Shielded Cable
Width In Inches 16-1/2"
Depth In Inches 6-1/4"
Height In Inches 15"
Required for Operation
K2 Operating Equipment Package, AK Series
Model
Glacier
SKU
9036-156

Glacier K2 Operating Equipment Package for AK Series Generators. Includes steam head.

MSRP
$1,705.00
Your Price
$1,193.50

K3 Operating Equipment Package, AK Series
Model
Columbia
SKU
9036-116

Columbia K3 Operating Equipment Package for AK Series Generators. Includes steam head.

 

MSRP
$1,645.00
Your Price
$1,151.50

K2 Digital Control Package, AK Series
Model
K2
SKU
9114-106

The Amerec K2 steam shower generator control kit works with Amerec AK series steam generators. Wi-Fi and Smart home ready, this control features adjustable time, temperature and a 24 hour delay and includes a ComfortFlo steam head. 

6 different Trim Ring/Steam head finishes for the K2 control are available.

 

MSRP
$990.00
Your Price
$693.00

K3 Digital Steam Shower Generator Control Kit, AK Series
Model
K3
SKU
9114-126

The Amerec K3 steam shower generator control kit works with Amerec AK series steam generators. This control kit is able to be mounted inside or outside the steam room and features a digital control, remote sensor and includes a ComfortFlo steam head.

6 different Steam head finishes for the K3 control kit are available.

MSRP
$860.00
Your Price
$602.00

KT3 Digital Steam Shower Generator Control Kit, AK Series
Model
KT3
SKU
9114-136

The Amerec KT3 steam shower generator control kit works with Amerec AK series steam generators. A stylish update to Amerec's KT60 control, the control is backward compatible with the classic KT60. Featuring a built-in temperature sensor, this control was designed for use inside the steam room. With the simple ease of 3-buttons, you control on/off, temperature, and time duration settings. The display alternates every 5 seconds between atmospheric room temperature and the remaining time of your steam session. With maximum session settings of up to 125 °F and 60 minutes (residential use), this control kit includes a ComfortFlo steam head.

6 different Steam head finishes for the KT3 control kit are available.

MSRP
$840.00
Your Price
$588.00

K4 On/Off Non-Thermostatic Control, AK Series
Model
K4
SKU
9114-147

The Amerec K4 steam shower generator control kit works with Amerec AK-series steam bath generators. This control kit may be mounted inside or outside the steam room and features a non-thermostatic control and includes a ComfortFlo steam head.

Choose from 6 available designer finishes for the ComfortFlo steam head.

MSRP
$330.00
Your Price
$231.00