Bathology Spectrum 410

DISCONTINUED

Model
Spectrum 410

This product has been DISCONTINUED

The Spectrum 410 recessed ceiling downlight boasts a museum-quality stainless steel faceplate, decorative stainless steel fasteners, a 3/16" thick frosted tempered glass lens and a high temperature silicone gasket to achieve its IP65 and U.L. wet location ratings.

Located behind the Spectrum 410's attractive lens rests lighting electronics at their finest. All components are pre-assembled on a removable tray for easy access. The electronic low-voltage transformer (120VAC/11.6VAC) is conveniently located on the housing rough-in pan. A one-piece aluminum housing secured to the ruggedly constructed galvanized steel frame contains the bi-pin lamp-holder with ceramic insulator and the complete fixture is wired utilizing high-temperature leads to ensure safe, reliable operation.

NOTE: The Spectrum 410 requires 9" of installation height for new construction projects or attic accessibility. Insulation must be set-back a minimum of 3" from the housing and the maximum ceiling thickness should not exceed 2".

  • Low-voltage operation (12VAC)
  • U.L. listed, suitable for wet locations
  • IP65 protection class rating
  • 3/16" Etched tempered glass lens
  • High-temperature wiring
  • Continuous silicone o-ring gasket
  • Stainless steel trim and fasteners
  • Dimmable with standard type dimmer
  • Wet environment rated
  • Durable stainless steel design
  • Residential and commercial bathing applications
  • Aesthetically pleasing trim and lens
  • Both functional and ambient lighting
  • Easy re-lamping
  • Enhanced bathing ambiance
  • Housing, thermally protected die-cast aluminum, 10-9/16"L x 11"W x 4-3/4"H
  • Rough-in pan
  • Trim, brushed stainless steel with etched glass lens, 6-7/8" diameter, 5/8" profile
  • Lamp, 50 Watt, 12VAC, T4, GY6.35, clear flood halogen
  • Lamp housing
  • Lamp socket plate
  • (2) Bar hanger brackets with wing nuts
  • Pre-wired 120V/12V electronic transformer assembly
  • 1-1/2" #8-32 Stainless steel screw
  • 2" #8-32 Stainless steel screw
  • (2) #8 Stainless steel hex nuts
  • (4) #6-32 Stainless steel screws
  • #8 Flat washer
  • (4) Wire nuts
  • RTV silicone sealant, .5 ounce tube
  • Installation template
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model Spectrum 410
Fixture Type Recessed Ceiling Downlight, Halogen
Dimming With Standard Type Dimmer
Insulation Contact Non-IC Rated
Minimum Installation Height 9"
Maximum Ceiling Thickness 2"
Rough-In Cut-Out 6-1/4"
Housing Length 10-9/16"
Housing Width 11"
Housing Height 4-3/4"
Transformer 75 Watt, 120VAC to 12VAC
Shipping Weight 13 lbs
Testing U.L. Listed, Suitable for Wet Locations
Trim Brushed Stainless Steel, 4B Finish
Trim Profile 5/8"
Trim Diameter 6-7/8"
Lens Etched, Tempered Glass, 3/16"
Lamp 50 Watt 12VAC, T4, GY6.35 Base, Halogen
Lamp Life 2000 Hours
Lamp Socket Bi-pin with Ceramic Insulator
Color Temperature 3000K
Color Rendering Index 100 Ra8
Leed LZ-1
Lumen 950
Protection Class IP65