Mr. Steam CT12E

The Mr.Steam CT12E Day Spa commercial steam bath generator is designed for steam rooms that operate less than less than 6 hours a day and have a maximum two-bather capacity. For use in day spas, resorts, and hotels, this 12 kilowatt steam generator is suitable for steam rooms between 361 and 575 cubic feet.

The CT12E is a high-performance, low-maintenance commercial steam generator constructed with a durable stainless steel casing measuring 17” wide, 18-3/4” high and 7-7/8” deep. This steam generator is also eco-friendly, using less than 2 gallons of water during a 20 minute steam bath session.

To operate the CT12E day spa steam bath generator, use the included eTempo/Plus steam generator control and CT-Steam Stop control. 

Also included for additional preservation are the AutoFlush maintenance draining system, MSTS in-room temperature sensor, AromaSteam Steamhead and Drip Pan.

It also operates with the factory-installed Express Steam option and is built to ASME and UL nationally recognized testing standards.

Features

• Industrial grade, serviceable heating element
• Unitized stainless steel reservoir
• Durable electronic components
• Round MiniDIN control connections
• Electronic water-level system
• Low voltage safety control circuits
• Built-in, 24-volt circuits
• ASME safety valve and full port drain valve
• UL/cUL listed

• Provides control of the steamroom by owner/operator from outside the steamroom.
• Programmable temperature and time settings allow the owner/operator to customize and enhance the steam bathing experience for each bather
• Standard with digital display and ergonomic soft-touch keypad with Chroma, Aroma & programmable memory settings
• Quick-responding temperature sensor maintains temperature within the steamroom
• Solid brass cover for durable finish & quality
• Digital readout display
• Preset 60-minute time cycle
• On/Off and pause modes
• Soft touch keypad
• Inside or outside the steam/shower enclosure installation
• Low voltage operation
• Displays troubleshooting codes
• Available in Round or Square design
• Available in Polished Chrome, Antique Brass, Brushed Bronze, Brushed Nickel, Matte Black, Oil Rubbed Bronze, Polished Brass, Polished Gold, Polished Nickel and Satin Nickel designer finishes

• Designed to maintain cooler surface temperatures, with improved steam flow and quieter infusion of aromatic oil into the steam for an enhanced steam room experience
• Solid brass for superior performance and finish
• Quieter operation
• Low profile and sleek design
• Available in Round or Square design
• Available in Polished Chrome, Antique Brass, Brushed Bronze, Brushed Nickel, Matte Black, Oil Rubbed Bronze, Polished Brass, Polished Gold, Polished Nickel and Satin Nickel designer finishes

• Automatically and electronically drains generator after use and refills tank with fresh water for “Clean Steam...Every time®”
• Improves performance and lengthens system life
• Efficiently removes accumulated sediment
• Simple plug-and-play connection
• Full 1” port design
• 24 Volts AC motorized actuation, 50/60 Hz, 6.5 Watts, Class 2
• Two position, normally open
• Brass valve body with 1/2” NPT connections
• 2-Pin integral electrical lead with “plug-in” electrical connection
• Gravity drain

• Built-in thermostat
• Maintains water temperature to start steaming more quickly
• Only available factory installed

• Galvanized sheet metal construction
• Integral 3/4" drain copper fitting

• On/Off operation
• Low profile
• Available in Polished Chrome, Polished Brass, Polished Gold, Polished Nickel, Satin Nickel, Brushed Nickel, Oil Rubbed Bronze, Antique Brass and Satin Gold finishes
• Inside the steam/shower enclosure installation
• Low voltage operation

• In-shower room temperature sensor
• Allows for temperature adjustment from remote control location

Includes

• CT Day Spa generator, 17"L x 18-1/2"H x 7-7/8"D
• eTEMPO/Plus operating control, 7/8” deep
• AromaSteam steamhead, 1/2” NPT, 7/8” deep
• CT-Steam Stop on/off control, 1-1/2” diameter, 1/8” deep
• CT81500 AutoFlush automatic drain valve
• MS 103867 drain pan, 25”L x 9”W x 1-1/2”H
• MSTS in-room temperature sensor, 30’ long
• MiniDIN control cable, 30’ long
• 3-pin control cable, 30’ long, hard-wired to control with plug-in connector
• RTV silicone sealant, .5 ounce tube
• Installation manual
• Limited Warranty