Designer B Series 8.0KW Sauna Heater, Amerec

DSNR-80B
Designer B Series 8.0KW Sauna Heater, Amerec
Discontinued by manufacturer
Contractors Bathers

Amerec Sauna Heaters...the most requested name in sauna bathing! With over 2,500 dealers, installers and service centers, SteamSaunaBath is proud to offer quality crafted Amerec Sauna Heater Packages!

A sauna heater is the “heart and soul” of the sauna room! The Amerec Designer B Series sauna heater utilizes an entry-level, built-in, dial time and temperature control to monitor your bathing environment. Mounted on the front or the side of the heater, the controls allow the user to adjust both bathing time (1-60 minutes) and temperature, and includes a time delay option of up to 9 hours.

Solidly constructed of a stainless steel body and stainless steel heating elements, this heater can remain looking as clean and new as the day it was first installed. All Amerec Sauna Heaters are UL listed and feature an exceptionally large rock capacity for direct contact with the heating elements. This direct contact ensures a soft, rich heat and a very pleasant steam.

NOTE: Additional Freight Charges May Apply.

Features
  • Wall-mounted
  • Stainless steel construction
  • Industrial grade, serviceable heating elements
  • Operates with built-in on/off, time and temperature controls
  • Exceptionally large rock capacity
  • Direct rock-to-heating element contact
  • UL listed
  • 23”H x 16-1/2”W x 11”D
  • For sauna rooms from 250 to 425 adj. cu. ft.

Includes
  • 50 lbs. of Olivine sauna stones
  • Installation Manual
  • Limited Warranty


Product SpecificationsDesigner B Series 8.0KW Sauna Heater, Amerec
ModelDesigner8.0B
Minimum Adjusted Cubic Feet250
Maximum Adjusted Cubic Feet425
Kilowatt Rating (KW)8 KW
Shipping Weight (Lbs.)81 lbs
Operating Voltage240V AC
PhaseSingle Phase
Nominal Amperage33.3 Amps
Recommended Protective Device40 Amp
Recommended Minimum Copper Wire Supply8 AWG
Width In Inches16"
Depth In Inches11"
Height In Inches23"