DK60/K30 Dual Control Package, Amerec

DK60/K30
DK60/K30 Dual Control Package, Amerec
Discontinued by manufacturer
Contractors Bathers

When installed with an Amerec AK Series residential steam bath generator, this top of the line dual temperature control package consists of a K60 and K30 controller installed in tandem and offers on/off, time and temperature control from both inside and outside the steam/shower enclosure.  Utilizing easy-to-use membrane touch pads, the DK60/K30 control package allows for the ultimate in Amerec generator time and temperature control operation.  Complete with matching finish Comfort Flo steam head.

Consider the DK60/K60 for enhanced steam bathing control.
Features

  • Time and temperature control
  • Last use time and temperature memory settings
  • Digital display
  • Mode indicator light
  • Settable 60-minute time cycle
  • On/off and pause modes
  • Easy-to-use, membrane touch pad
  • Inside and outside the steam/shower enclosure operation
  • Available in Polished Chrome, Polished Brass, Polished Nickel, Brushed Nickel, and Oil Rubbed Bronze designer finishes
  • Low voltage operation
    Includes
  • K60 surface-mounted control, 3-1/4” square, 1-3/8” deep
  • K30 surface-mounted control, 3-1/4” square, 1-3/8” deep
  • Comfort Flo steam head, 1/2” NPT
  • Two 8-pin, 8-wire control cables, 30’ long with “snap-in” connectors
  • 2-pin, 2-wire sensor cables, 25’ long with “snap-in” connectors
  • Temperature sensor
  • Two control housing rough in plates and fittings
  • Control mounting hardware
  • Two control cable strain reliefs
  • Installation and operation manual
  • Limited warranty


  • Product SpecificationsDK60/K30 Dual Control Package, Amerec
    ModelDK60/30
    Shipping Weight (Lbs.)5 lbs
    DC Voltage2 Controls, 5V DC Each
    Control "Rough In" Cut Out2 Controls @ 2-3/8" Diameter Each
    Control Sensor Cable25', 2 Conductor, 22 AWG, Shielded Cable
    Control Sensor "Rough In" Cut Out7/8" Diameter
    Generator Control Connection8 Pin, Snap-In Connector
    Generator Control CableTwo, 25', 8 Conductor, 28 AWG, Shielded Cables
    Width In Inches2 Controls, 3-1/4" Each
    Depth In Inches2 Controls, 1-3/8" Each
    Height In Inches2 Controls, 3-1/4" Each