|Room Temperature Sensor, with Integral Cable for Tempo, eTempo, iTempo, AirTempo, Mr Steam|
This Room Sensor is for use on Tempo, eTempo, iTempo, and AirTempo controls on Mr.Steamï¿½s Residential MS model steam bath generators.
The MSTS Room Sensor work with the Tempo, eTempo, iTempo and AirTempo controls and generators. It allows for the temperature control to be installed on the exterior of the steam bath environment and maintain temperature from the interior sensor. If 30ï¿½ is not long enough, 60ï¿½ is available. Note that you cannot use a 30ï¿½ plus a 60ï¿½ together.
One (1) MSTS is needed, if desired and comes in a 30ï¿½ length.
To ensure the accuracy of your parts order, please do contact a SteamSaunaBath representative at 800-707-2862. We enjoy sharing our knowledge and wish to ensure your success.
Note: ï¿½To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Important! ï¿½SteamSaunaBath strongly recommends the installation of genuine factory parts to ensure proper equipment operation and bather safety. Though similar components may be available at industrial supply chains, steam and sauna equipment are uniquely manufactured from UL verified components with very precise specifications. To reduce operator liability, demand factory authorized parts.
Rely on our Huge warehouse SteamSaunaBath maintains the largest, most diverse parts, accessory and equipment inventory for steam generators and sauna heaters in the world. Our shelves are loaded with parts, accessories and equipment from all manufacturers for over four decades. Give us a callï¿½weï¿½ll have the answer!
|Product Specifications||Room Temperature Sensor, with Integral Cable for Tempo, eTempo, iTempo, AirTempo, Mr Steam|
|Shipping Weight (Lbs.)||2 lbs|
|DC Voltage||5V DC|
|Generator Control Connection||3 Pin, Plug-In Connector|
|Generator Control Cable||30', 3 Conductor, 24 AWG, Shielded Cable|
|Depth In Inches||1-1/2"|
|Diameter In Inches||1/4"|