Steamist AHE-0016-1

Heating Element, HC-9, 9KW 208V 1PH

Model
AHE-0016-1

The heating element resides in the pressurized vessel which is responsible for boiling water to create the vapor and is used on Steamist steam bath generator models HC-9.

NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

The heating element has a copper sheath with a steel flange and comes with a graphite gasket. Stamped on the flange is the voltage and kilowatts.

A common reason for a failed element is lime build-up in the tank and water probes. We suggest having a water treatment system in place along with a routine preventative maintenance program to extend the life of the heating elements.

When replacing a heating element, always use a new gasket. Steamist gaskets do not need compound but if you choose to use it, make sure to use a compound rated to at least 300 degrees F.

It is a good idea to have extra gaskets on hand for preventative maintenance cleanings and an extra element on hand to reduce down time.

NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

Swipe horizontally to reveal full table content.
Model AHE-0016/1
Voltage 208V
Kilowatt 9KW
Phase 1PH