Steam Shower Design Options

Print Page

Get Steam Shower Design Ideas!

1. Electrical line (120 or 240 volts AC) from main panel to steam generator location terminating with an appropriate disconnect
2. Control wiring run from steam generator to control location
3. Water line from a source (preferably hot) to steam generator terminating with a shut-off valve and appropriate back-flow device
4. Aroma Oil Pump feeds aroma oils directly into steam line
5. Steam line of copper running from steam generator location to a point in the steam room best suited for introducing steam
6. Drain valve (if applicable) plumbed to an acceptable discharge
7. Pressure relief valve line plumbed to an acceptable discharge (drain pan in diagram)
8. Drain pan plumbed to an acceptable discharge

Please consult local codes, manufacturers' installation instructions, and your trade professionals for specific installation related details.