Warning: ob_start() [ref.outcontrol]: output handler 'ob_gzhandler' cannot be used after 'mb_output_handler' in /home/steams6/public_html/forum/index.php on line 136
Print Page - Aqua Glass steam generators

SteamSaunaBath User Forum

Steam Shower => Technical Support => Topic started by: Kivi on July 19, 2011, 05:15:21 PM

Title: Aqua Glass steam generators
Post by: Kivi on July 19, 2011, 05:15:21 PM
I have an aqua glass ASR4

It was in a flood and needs to be replaced. It has what appears to be a TC-135 control. Can we replace this with a SM5 and use the same control?

Title: Re: Aqua Glass steam generators
Post by: Jennifer on July 20, 2011, 04:39:46 PM
Replacement of the generator is a must due to the flood.

If you had a TC-135 working with the Aquaglass generator before than you can still use it or even upgrade to an SMC-150.  The cable looks similar to a telephone cable and is 6-pin
Note that Steamist back then the controls all were octagon so the TC-120, TC-130 and TC-135 all look the same but might have a different cable connection.

It is also very important that the electrical in place is the correct spec for a new SM-5
Which is a 25 amp breaker.