Warning: ob_start() [ref.outcontrol]: output handler 'ob_gzhandler' cannot be used after 'mb_output_handler' in /home/steams6/public_html/forum/index.php on line 136
Print Page - ThermaSol Auto Power Flush Indicator

SteamSaunaBath User Forum

Steam Shower => Technical Support => Topic started by: Jarvi on May 27, 2009, 03:34:46 PM

Title: ThermaSol Auto Power Flush Indicator
Post by: Jarvi on May 27, 2009, 03:34:46 PM
We had a steam shower installed about 4 months ago.  We bought a top of the line thermasol, and of corse, we love it.  I am curious though, my contractor said these generators were so good, they even tell you when it is time to flush the generator.  Like I wrote earlier, it has been four months to date and we steam quite a bit.  Is there something wrong with my generator?  Did they install it wrong? I am getting quite nervous.  Does anybody have any expierence with this?  We have a Thermasol Pro-395 generator with an auto power flush feature and something called 'smart steam'( ? ). 

Title: Re: ThermaSol Auto Power Flush Indicator
Post by: Faith on June 13, 2009, 03:48:11 PM
This system has a "maintenance timer" designed to lock out steam bathing operation after 1000 minutes of use without draining.  Once you complete the PowerFlush Cleaning Cycle the maintenance timer resets and functionality is restored.  Your control will indicate when you have reach maximum use without draining.  Check out your operation manual for specifics.  The manual can be found on this page..  Pro-395 (http://www.steamsaunabath.com//catalog/product_info.php/manufacturers_id//products_id/101304)