Warning: ob_start() [ref.outcontrol]: output handler 'ob_gzhandler' cannot be used after 'mb_output_handler' in /home/steams6/public_html/forum/index.php on line 136
Print Page - AK30 AMEREC

SteamSaunaBath User Forum

Steam Shower => Installation Support => Topic started by: William515 on January 17, 2012, 09:38:58 AM

Title: AK30 AMEREC
Post by: William515 on January 17, 2012, 09:38:58 AM
We are installing a AK30 by Amerec (three 10kw units installed in tandem).  Does it need to have three steamheads, one for each generator? If so, can they all be right next to each other, or do they need to be spread apart in the room?  Please advise.  Thanks ;)

Title: Re: AK30 AMEREC
Post by: Jennifer on January 17, 2012, 05:55:01 PM
Steamheads are required per generator.  With the 3 tandem AK30 you will have 3 of everything except a control.
They can be next to eachother with enough room to remove one if replacement is needed in the future.  Also, steam heads should always be as far from the bather as possible so at the bench is not a good idea.