Title: Amerec AT series generator
Post by: Alex on April 05, 2012, 04:16:35 PM
I am so confused, I want the Amerec AT10 steam generator with the Fragrance injector FC220F and the power control unit FC200CPU and had these parts suggested and quoted from a local supply house. I also need some other items which only you seem to offer like the specific electrical and fitting packages which are such a great time saver. I always check an independent supplier so I can check prices and then come to you for the equipment. (Can't blame a guy for keeping everybody honest.)
Anyway when i tried to match the equipment i was quoted locally against steamsaunabath website i found many differences in product and pricing. Can you help me untangle this please?
Title: Re: Amerec AT series generator
Post by: Earl on April 05, 2012, 04:47:14 PM
I have to admit you had me a bit confused on this one. I had to go into deep research mode to figure out why something hit a wrong note on this and discovered the following:
The pump your seller is quoting you; the FC220F and the power control unit FC200CPU is not only not a stand alone unit but it will not work with the AT generator.
It is for use with the AK series generator and also requires the K200i control package. if you want to verify with your seller these are part numbers (pump) 9223-220; K200i (control) 9221-018; (FC200CPU) 9223-200.
We sell the same pump but it is the wrong one for your application.
What you need for the AT unit is the Fragrance Injector Pump Kit, Amerec A220FP This is a self contained unit that requires no extra parts. It comes with a small 1/2 dollar sized button that controls the pump and can be installed either inside or outside the shower. Don't forget to order a steam head. the control does not come with one.