SteamSaunaBath User Forum

Steam Shower => Steam Bath Generators & Operating Equipment => Topic started by: Earl on May 18, 2012, 04:36:34 PM

Title: Jacuzzi Steam pro 7
Post by: Earl on May 18, 2012, 04:36:34 PM
I have a Jacuzzi Steam Pro pk7 generator that I would like to replace the control on changing them from brass to brushed nickel. I could not get any information from Jacuzzi and they advised me to speak to the experts at SSB to see if you could help.
I don't have much information but the serial number is E70764 and I am including a couple of pictures. I hope this helps.


Title: Re: Jacuzzi Steam pro 7
Post by: Earl on May 18, 2012, 05:18:47 PM
This was a question asked by a customer who was completely in the dark about how to replace his controls. After much back and forth and requesting pictures I was able to ascertain that this is an Amerec manufactured generator. I knew from the PK that is was made by Amerec but more importantly the controls had to match. Based on the pictures and much research we determined the K30 control would work perfectly. The lesson here is never guess at what you need. All PK generators are made by Amerec but all Jacuzzi generators are not made by Amerec. Always call on the expert before replacing parts on an obscure or discontinued generator. Be prepared to have as much information as possible including serial number, model number and most importantly pictures so our experts have something to work with.