Warning: ob_start() [ref.outcontrol]: output handler 'ob_gzhandler' cannot be used after 'mb_output_handler' in /home/steams6/public_html/forum/index.php on line 136
Steam generator sizing- I want it hot! - Steam Sauna Bath Forum

Welcome, Guest. Please login or register.
Did you miss your activation email?
May 27, 2018, 10:11:37 PM

Login with username, password and session length

1,918 Posts in 743 Topics by 3,249 Members
Latest Member: Dunk_The_Lunk
+  SteamSaunaBath User Forum
|-+  Steam Shower
| |-+  Operation
| | |-+  Steam generator sizing- I want it hot!
« previous next »
Pages: [1] Print
Topic: Steam generator sizing- I want it hot!  (Read 3936 times)

Posts: 0

« on: July 20, 2011, 12:28:48 PM »

I have a customer with a steam room 48x64x96 high, 3 walls stone tile, I glass, 1 outside. He is looking at the thermasol uinit. I believe the SSA 240 is correct. But here is the kicker. He wants the room to go from 70 degree to 104 degrees in 10 minutes. Would going up a size be too much?
Posts: 41

« Reply #1 on: July 20, 2011, 12:36:43 PM »

The 240 is the model that they need. If they go to the next model which would be the 395, the room would get to hot to quick thus not allowing the humidity to build up in the shower like it should. Then you will get the complaint "the room is hot but i don't see any steam". A 30 degree change in ten minutes is quite drastic.
Advise your customer to turn on the steam and after 5 or 10 minutes go in and relax as the temperature goes up. It's the experience not how fast you get there that counts.
Pages: [1] Print 
« previous next »
Jump to:  

Copyright 2003-2018 © Steam Sauna Bath is a division of Bathing Brands, Inc. All Rights Reserved.