SteamSaunaBath User Forum

Steam Shower => Technical Support => Topic started by: Brad on January 22, 2010, 12:49:08 PM



Title: STEAMIST LC-12 CONTROL
Post by: Brad on January 22, 2010, 12:49:08 PM
I have a very old Steamist LC-12 steam generator that operaters with a TC-120 control. The control is bad and there does not seem to be any available anywhere, can I  put the newer TC-135 control in it's place?


Title: Re: STEAMIST LC-12 CONTROL
Post by: Misty on January 27, 2010, 06:03:53 PM
The LC-12 generator is roughly 20 years old and only operated with the TC-120 or the TC-110 (http://www.steamsaunabath.com//catalog/product_info.php/cPath/64_67/products_id/299) control, which is still available.

If you wish to use the TC-135 control you must replace the  PC board (http://www.steamsaunabath.com//catalog/product_info.php/manufacturers_id//products_id/202168) and cut a slightly larger hole in your wall to fit the control.  I would highly recommend speaking to a Steam Bath Specialist (http://www.steamsaunabath.com/catalog/project_coordinator.php) prior to upgrading this control.