SteamSaunaBath User Forum

Steam Shower => Technical Support => Topic started by: Tyler on May 08, 2012, 12:12:46 PM



Title: Steamist TC-120 control replacement
Post by: Tyler on May 08, 2012, 12:12:46 PM
I have a Steamist control octagon shaped with the little winder on the bottom. Can i replace this with the SMC-150 control package?


Title: Re: Steamist TC-120 control replacement
Post by: Earl on May 08, 2012, 12:23:56 PM
Looks can be misleading. Does this control have a digital readout, is octagon shaped and is it in steam room or outside the room?


Title: Re: Steamist TC-120 control replacement
Post by: Jennifer on May 08, 2012, 12:44:32 PM
As long as the existing control cable looks similar to a telephone or internet network cable and has 6-wires, then yes, the new controls will work.
If the existing is 4-wire, then a new control will not work.


Title: Re: Steamist TC-120 control replacement
Post by: Tyler on May 08, 2012, 01:00:23 PM
The control is octagon shaped, it does have a digital readouot and it is inside the steam room.


Title: Re: Steamist TC-120 control replacement
Post by: Earl on May 08, 2012, 01:05:25 PM
Okay, so what you have is the TC-130 control which can be replaced by the SMS-150 control package which will give you a matching square steam head as well.