SteamSaunaBath User Forum

Steam Shower => Technical Support => Topic started by: Johanna on July 16, 2009, 04:42:27 PM



Title: Thermasol VersaTemp Control replacement
Post by: Johanna on July 16, 2009, 04:42:27 PM
I have an older Thermasol steam generator that works with the VersaTemp control.
My plumber verified that the control needs to be replaced to get my system working again.
However, I am unable to locate this control.
Does anyone know where I may obtain a VersaTemp control or is there a substitution control available that will work with my unit?
Looking forward to any responses.
Thank you.


Title: Re: Thermasol VersaTemp Control replacement
Post by: Earl on August 21, 2009, 10:53:15 AM
Your control is now obsolete and unavailable but your generator can probably be upgraded to use a newer control with a few modifications.  You probably need an Elite control (http://www.steamsaunabath.com//catalog/product_info.php/cPath/64_67/products_id/366) and to replace the PC board.  If the control cable has 6 pins this will work with the existing cable.  If the control cable has 4 pins or a flat cable you will also need to replace the cable as well. 

I would start by calling a Steam Bath Specialist (http://www.steamsaunabath.com/catalog/project_coordinator.php) to help you determine the age of your existing equipment and the best way to get you steaming again.