Title: My Steamist Steambath Control Board will not turn on.
Post by: alydame on December 28, 2013, 08:48:46 PM
I have a Steamist Model SM-8/Serial Number 809656 - with what appears to be a TC-135-05 Control Board. It is installed outside of the shower. After reading multiple manuals regarding the system, it says that it can be installed both inside AND outside of the shower. In any case, I used my steam last night with no problem. I was in the shower probably a little over 30 minutes. It turned on like normal and immediately produced hot steam like always so I don't think this is the problem. However, the steam shut itself off which I also know it can do after 30 minutes on some models. After that happened I attempted to turn the steam back on and the control panel would not turn on at all. No lights. Just black. I've looked at all of the plug-ins on the main box and it seems that everything is fine. I've also reset all of the breakers in my home to see if that could be the issue and nothing. :( Then I went on to reset all of the plugs in my home. Still nothing. Is there a way to reset the control board itself?
Any help you can give will be greatly appreciated. Thank you so much.
Title: Re: My Steamist Steambath Control Board will not turn on.
Post by: Lexi on January 24, 2014, 07:24:34 AM
There are several possibilities for what is occurring (or not occurring). I would suggest you call in and speak with a Technical Specialist to isolate the issue and then get you up and running again. Call 800/707-2862 and ask for Technical Support.