SteamSaunaBath User Forum

Steam Shower => Technical Support => Topic started by: monty13 on August 16, 2012, 11:12:56 AM



Title: Steamist, TSG, error code E03
Post by: monty13 on August 16, 2012, 11:12:56 AM
I have just installed a Steamist TSG7 generator and control and for some reason I cannot get it to work. If I manually start it with the test button it will start up but on the key pad I just get an E03 message.


Title: Re: Steamist, TSG, error code E03
Post by: Jennifer on August 20, 2012, 11:52:26 AM
Error messages “Er 03” means the control could not communicate with a
steam generator and may be a cable connection problem. If this error
occurs, check both ends of the control cable for clean, dry and secure
connections. Dirty contacts can be cleaned with alcohol and a cotton
swab or a toothbrush. This can also happen if the control is not sealed
and the cable connections get wet. Also make sure the generator is
not in test mode. Try resetting the breaker.