Steam Control
A steam generator control is the user-interface for the steam bath generator. On, off, steam bathing temperature control, and much more is available at your fingertips from both inside and outside the steam shower. From simple to sophisticated, steam generator control design and features vary greatly in both design and features, each uniquely enhancing the steam bathing experience!
Outside-the-steam-shower (exterior) controls can be installed anywhere that is convenient with primary consideration given to accessibility while steam bathing. Exterior controls are convenient when initiating the steam bath, however they can be quite inconvenient when the bather wants to stop the steam generator or adjust the bathing environment. Leaving the steam shower to make control adjustments during your bath is quite unpleasant. When an outside control is desired, SteamSaunaBath always recommends the installation of a secondary control inside the steam shower for a safer, convenient, and pleasant steam bathing experience.
Inside-the-steam-shower (interior) controls are low voltage and generally installed approximately 48" off the floor, furthest away from the steam outlet head and within reach of the steam bather while relaxing. SteamSaunaBath highly recommends the installation of at least one interior steam shower control. Consider the value and convenience of adjusting your environment while seated or relaxed. Additionally, an interior control offers simplicity of operation for both infrequent steam bathers and guests. When a single interior steam shower control is utilized, special consideration should be given to installing it in close proximity to the enclosure door for easy on/off operation.
A secondary or dual control system offers the steam bather the most flexibility and sophistication in steam bath operation. Initiate your 10-minute vacation without entering the enclosure. Let the room gently warm as the inside control monitors the environment. Enter your sanctuary minutes later never looking back at the world outside as you enjoy complete control of your steam bathing comfort.
Wireless remote controls (RF & IR) allow for complete steam bath control from the comfort of your steam shower seat. Approved for inside the shower operation, these hand-held remotes afford the bather the ultimate in luxury and convenience.
This 30 or 60-minute timer device mounts outside the steam shower and has been operating steam generators for over 40 years. Simple, reliable and operates at 110 or 240 volts AC, the mechanical timer is now seldom selected due to the advent of the electronic, low voltage, inside-the-steam shower silent timer.
Note: We realize there are many details, facts, and features to learn about when selecting a steam bath generator and control system to meet your needs. Rely on our knowledgeable team to lead you through this process. Give us 10 minutes on the phone to clear the air on the best equipment for your application and budget! Call us toll free at 1-800-707-2862 for immediate assistance!