Steam Room / In-Shower Light, Recessed, 6-7/8" Diameter Stainless / Glass Lens, Bathology

Spectrum 410
Steam Room / In-Shower Light, Recessed, 6-7/8\" Diameter Stainless / Glass Lens, Bathology <img src=\"/catalog/images/ssb-sale-item-banner.png\" />

Lighting elegance engineered by Bathology!

Spectrum 410�s low-voltage operation, U.L. Wet Location Listing and IP65 Protection Class rating make it the ideal light for both residential and commercial bathing; however, it�s the 410�s spun stainless steel trim, frosted glass lens and recessed, small-scale design that make it the clear choice by architects and interior designers.

The Spectrum 410 recessed ceiling downlight boasts a museum-quality stainless steel faceplate, decorative stainless steel fasteners, a 3/16" thick frosted tempered glass lens and a high temperature silicone gasket to achieve its IP65 and U.L. wet location ratings.

Located behind the Spectrum 410�s attractive lens rests lighting electronics at their finest. All components are pre-assembled on a removable tray for easy access. The electronic low-voltage transformer (120VAC/11.6VAC) is conveniently located on the housing rough-in pan. A one-piece aluminum housing secured to the ruggedly constructed galvanized steel frame contains the bi-pin lamp-holder with ceramic insulator and the complete fixture is wired utilizing high-temperature leads to ensure safe, reliable operation.

Note: The Spectrum 410 requires 9" of installation height for new construction projects or attic accessibility. Insulation must be set-back a minimum of 3" from the housing and the maximum ceiling thickness should not exceed 2".

Benefits Features
  • Wet environment rated
  • Durable stainless steel design
  • Residential and commercial bathing applications
  • Aesthetically pleasing trim and lens
  • Both functional and ambient lighting
  • Easy re-lamping
  • Enhanced bathing ambiance
  • Low-voltage operation (12VAC)
  • U.L. listed, suitable for wet locations
  • IP65 protection class rating
  • 3/16" Etched tempered glass lens
  • High-temperature wiring
  • Continuous silicone o-ring gasket
  • Stainless steel trim and fasteners
  • Dimmable with standard type dimmer

  • Housing, thermally protected die-cast aluminum, 10-9/16"L x 11"W x 4-3/4"H
  • Rough-in pan
  • Trim, brushed stainless steel with etched glass lens, 6-7/8" diameter, 5/8" profile
  • Lamp, 50 Watt, 12VAC, T4, GY6.35, clear flood halogen
  • Lamp housing
  • Lamp socket plate
  • (2) Bar hanger brackets with wing nuts
  • Pre-wired 120V/12V electronic transformer assembly
  • 1-1/2� #8-32 Stainless steel screw
  • 2� #8-32 Stainless steel screw
  • (2) #8 Stainless steel hex nuts
  • (4) #6-32 Stainless steel screws
  • #8 Flat washer
  • (4) Wire nuts
  • RTV silicone sealant, .5 ounce tube
  • Installation template
  • Installation and operation manual