Control Humidity and Temperature Levels in the Steam Shower with a Bathology Atmospheric 410 In-Shower Ventilation System
Atmospheric 410 Steam Shower Exhaust Fan System
Homeowners, clubs, and spas across the nation use the Bathology Atmospheric 410 in-shower ventilation system to control humidity and temperature levels in their steam shower environments. At the touch of a button, this in-shower ventilation system helps bathers maintain a proper airflow throughout the steam bath environment. The Atmospheric 410 is crafted from only the most durable materials and is impervious to the effects of moisture.
Bathology Atmospheric 410 Equipment and Components
- Exterior wall fan, 124 CFM (option)
- Exterior roof/wall fan, 116 CFM (option)
- Recessed exhaust fan switch
- Motorized damper, 4"
- Stainless steel grille
- Duct reducer collar, 5” to 4" diameter (with roof fan only)
- Duct extension collar, 4” diameter (with wall fan only)
- Elbow, 90º, gasketed, 4”
- Power supply, 120VAC
- Switch cable with coupler, 25’
- Flex duct, 4"x 25'
- RTV silicone sealant, .5 ounce tube
- Mastic, 1/12gal cartridge
- Two NEMA Male plug, 6’
- Two Strain relief bushings
- Three duct reducer/extension collar screws
- Three damper screws
- Two power supply mounting screws, 1"
- Two mounting screw anchors
- Four fan mounting screws, 1-1/2"
- Four fan mounting screw anchors
- Two duct ties, 18"
- Two duct ties, 36"
- Manufacturer’s warranty
- Installation manual
Fan Switch
The Atmospheric 410 fan comes equipped with an intuitive, low-voltage, flush-mounted in-shower fan switch that features a soft-touch keypad. The soft-touch fan switch allows bathers to control the power settings, adjust operation speeds, and control the indicator lights on the ventilation system.
Stainless Steel Grille
The exhaust fan that comes with the Atmospheric 410 boasts a durable and corrosion resistant stainless steel grille that compliments any steam bath environment. The grille is crafted from concentrically fastened brushed stainless steel circles that are separated by precise space for both ideal airflow and stylish design.
Motorized Damper
The in-shower exhaust fan features a motorized and tensioned damper with a waterproof pressure seal gasket. The damper acts as a barrier between the steam bath and the outside environment. Once the in-shower ventilation system is powered on, the damper on the exhaust fan will open allowing heat and moisture to be drawn out of the steam room. When turned off, the damper closes and prevents a further exchange of air between the inside and outside environment. The insulated duct work beyond the damper is left open to the outside air, allowing evaporation of any residual moisture.
Exterior Wall or Roof Fan
An exterior wall or roof mount waterproof exhaust fan is an essential component to any steam bath ventilation system. The Atmospheric 410 system ships with a state-of-the-art stainless fan that helps balance heat levels and remove excess vapor from the steam shower environment. Unlike typical bath or shower fans that push moisture-laden air, the Atmospheric 410 wall and roof fans draws the air completely outside the home.
The Atmospheric 410 ventilation fan is virtually silent and will not interrupt the steam bathing experience. In fact, it’s easy to forget this fan is on throughout the bathing session. For this reason, the system includes an automatic 20 minute shutoff feature. This ventilation system is U.L. listed for wet location use and makes a perfect addition to any steam bath environment.
Contact SteamSaunaBath
Homeowners,clubs, and spas across the nation utilize the Atmospheric 410 ventilation system in their steam bath environments. Bathers employ this ventilation system to balance heat levels and to remove excess vapor directly from within a wet environment. View the Atmospheric 410 today and contact a steam and sauna technician at SteamSaunaBath if you have any questions about this steam shower exhaust system.
