Bathology Atmospheric 410

In-Shower Ventilation Exhaust Fan System

Model
Atmospheric 410

Transform your steam room or shower with the only ventilation system engineered specially for in-shower applications, by Bathology!

Unlike any normal exhaust fan, the Atmospheric 410 Steam and Shower Ventilation Fan System is the builder's choice for controlling humidity and temperature in any wet environment.

MSRP
$2,596.10
Your Price
$2,336.49

At the touch of the waterproof button, this innovative in-shower ventilation system balances the ambient temperature in the bathing environment and then removes vapor, helping to dry out the shower for a worry-free bathing experience.


Precision crafted and assembled from high-quality components, this cutting-edge Bathology ventilation fan system unites a switch, fan, damper, and grille for unmatched moisture control.


Fan Switch

Intuitive, low-voltage, and flush-mounted, this in-shower, fan switch features a soft-touch keypad with on/off, incrementally adjustable speed controls, and indicator lights. The lowest speed setting will remove excessive ceiling heat or allow for ideal thick, rich steam shower fog while the highest setting will clear steam and vapor in seconds.  The integrated 20-minute automatic shutoff feature will allow for convenient set-it and forget-it, shower-drying results.


Waterproof Wall or Roof Fan

Essential to any steam and shower ventilation system is an exterior-mounted, waterproof fan.  Unlike typical bath fans that push moisture-laden air, Atmospheric 410 wall and roof fans draw the air completely outside the home.  U.L. listed for wet location use, these durable and efficient fans provide for ideal whisper quiet operation.


Motorized Damper

When keeping heat and moisture contained, only a motorized and tensioned damper with a waterproof pressure seal gasket will do.  Once powered on, the Atmospheric 410 damper will open allowing heat and moisture to be drawn out of the environment.  When turned off, or after 20 minutes, the damper securely closes and creates a seal to ensure no exchange occurs between in-home and outdoor air.  The insulated duct work beyond the damper is left open to the outside air, allowing evaporation of any residual moisture.


Stainless Steel Grille

Bold and striking by design, the super quiet Atmospheric 410 boasts a grille befitting today's super shower. Concentrically fastened brushed stainless steel circles are separated by precise space for both ideal airflow and stylish design.  Unlike traditional fan grilles, this element is impervious to moisture and heat.


Atmospheric 410 is an essential component of a luxury shower.  Its in-shower keypad allows for convenient control of the bathing atmosphere while the motorized damper, insulated duct and exterior-mounted fan provide top-quality moisture evacuation.  Nearly silent, this one of a kind wet environment fan system is sure to please the most discriminating bather.

  • Whisper quiet performance 
  • High CFM/Watt efficiency
  • Superior performance @ Higher Static
  • Stainless Steel decorative grille, 6" diameter
  • Motorized backdraft damper
  • Variable speed control
  • In-shower keypad
  • 20-Minute auto shutoff
  • Energy Star Rated
  • CSA Listed
  • UL Listed for Wet Locations
  • Exterior wall fan, 124 CFM (option)
  • Exterior roof/wall fan, 116 CFM (option)    
  • Duct reducer collar, 5" to 4" diameter (with roof fan only)
  • Duct extension collar, 4" diameter (with wall fan only)    
  • Motorized damper, 4"    
  • Stainless Steel grille    
  • Elbow, 90°, gasketed, 4"    
  • Power supply, 120VAC    
  • Fan switch    
  • Switch cable with coupler, 25'  
  • Flex duct, 4"x 25' (25' is maximum length)
  • RTV silicone sealant, .5 ounce tube    
  • Mastic, 11 ounce cartridge    
  • Two NEMA Male plug, 6'    
  • Two Strain relief bushings    
  • Three duct reducer/extension collar screws    
  • Three damper screws    
  • Two power supply mounting screws, 1"    
  • Two mounting screw anchors    
  • Four fan mounting screws, 1-1/2"    
  • Four fan mounting screw anchors    
  • Two duct ties, 18"    
  • Two duct ties, 36"    
  • Manufacturer's warranty    
  • Installation manual
Swipe horizontally to reveal full table content.
Model Atmospheric 410
Swipe horizontally to reveal full table content.
Wall Fan (option)
Type Exterior, Wall, 4" Duct Connection
Duct Connection 4" Diameter
Duct Extension Aluminum, 12" Length
Dimensions 10-1/2"W x 13"H x 6"D
Housing Composition Galvanized Steel, 20 Gauge
Housing Finish Baked Powder-Coat Finish, White
Air Volume 124 CFM
AC Voltage 120V AC
Power Consumption 19W
Nominal Amperage 0.17A
Lubrication Permanently Lubricated, Sealed Ball Bearings
Protection Thermal Overload, Automatic Reset
Speed Control 20-100%
Airstream Tolerance 34°-140°F
Weight 8 lbs
"Rough-In" Cut-Out 4-3/8" Diameter
Testing CSA Listed, UL Listed, Energy Star Rated
Swipe horizontally to reveal full table content.
Roof/Wall Fan (option)
Type Exterior, Roof/Wall, 5" Duct Reducer Connection
Duct Reducer Collar Galvanized Steel, 22 Gauge, 6" Length, 5" to 4" Diameter
Duct Connection 4" Duct
Dimensions 10-15/16" Diameter x 6"H
Base Plate Dimensions 15-1/2"W x 15-1/2"L
Housing Composition Galvanized Steel, 22 Gauge
Housing Finish Baked Powder-Coat Finish, Gray
Air Volume 116 CFM
AC Voltage 120V AC
Power Consumption 19W
Nominal Amperage 0.18A
Lubrication Permanently Lubricated, Sealed Ball Bearings
Protection Thermal Overload, Automatic Reset
Speed Control 20-100%
Airstream Tolerance 34°-140°F
Weight 11 lbs
"Rough-In" Cut-Out 5-3/8" Diameter
Testing U.L. Listed; CSA Listed
Swipe horizontally to reveal full table content.
Damper
Type Motorized, Positive Close, Spring-Tensioned
Dimensions 7-3/4"W x 10"L x 5"H
Body Composition Galvanized Steel, 28 Gauge
Blade Composition Galvanized Steel, 22 Gauge
Seal Composition Vinyl Foam, Low Density
AC Voltage 120V AC
Motor High Torque
Endurance Test 100,000 cycles
Swipe horizontally to reveal full table content.
Grille
Type Decorative, 4" Duct Connection
Dimensions 6" Diameter, 1-1/2" Profile
Composition 304 Stainless Steel
Finish #4 Sanitary
"Rough-In" Cut-Out 4-1/4" Diameter
Swipe horizontally to reveal full table content.
Elbow
Type 90°, Stamp/Stitch Welded, Flangeless, Dual-Gasketed
Composition Galvanized Steel, 22 Gauge
Gasketing EPDM Rubber, Dual - Wiper & Hollow
Wiper Gasket ASTM D2000-86 M3BA 810 B13 C12 F17, Black
Hollow Gasket ASTM D2000-86 M8BA 507 B13 C12, Green
Gasket Operating Temperature -20°F to 140°F
Swipe horizontally to reveal full table content.
Duct
Type Insulated, Reinforced, Flex, Three-Ply
Interior DImensions 4” Diameter x 25’ Length
Exterior Dimensions 6" Diameter x 25' Length
Interior Ply Composition Dual Lamination Polyester with Encapsulated Wire Helix
Middle Ply Composition Fiberglass
Exterior Ply Composition Polyester, Tri-Directional Fiberglass Scrim Reinforced, Gray
R-Value 4.2
Operating Temperature -20°F to 140°F
Testing UL-181
Swipe horizontally to reveal full table content.
Duct Tie
Composition Nylon, Natural
Operating Temperatures Max 185°F
Tensile strength 175 lbs
Testing UL 181-B-C Approved
Swipe horizontally to reveal full table content.
Mastic
Type Duct Sealant, Water Based, UV Resistant
Composition Liquid, Gray, 1/12-Gallon
Use Indoor / Outdoor
Testing UL 181B, USDA, FDA, EPA approved
Swipe horizontally to reveal full table content.
Fan Switch
Type Flush-Mounted, In-Shower
Voltage 5VDC
Diameter 2-1/32”
Trim Depth 3/16”
Trim Finish Polished Chrome or Brushed Nickel
Body Diameter 1-17/32”
Body Depth 1-5/16”
"Rough-In" Cut-Out 1-1/2” Diameter
Time Crcuit 20-Minute Off Delay
Wall Material Thickness 2-1/2”
Swipe horizontally to reveal full table content.
Power Supply
Operating Voltage 120V AC
Nominal Amperage 15 AMPS
Length 7-7/8"
Width 7-1/2"
Height 3-1/4"
Testing CSA, Type 2