Amerec AK9

AK Series 9kW Steam Shower Generator

Model
AK9
SKU
9014-127

The Amerec AK9 is a 9kW home steam shower generator is engineered for residential and day spa steam baths with dimensions up to 300 adjusted cubic feet (ACF).

Required control package sold separately.

MSRP
$2,820.00
Your Price
$1,325.00

If you see a lower price on the Amerec AK9 steam generator, call us, and we'll match it, plus 10% of the difference!

 

The Amerec AK9 is engineered for home and day spa steam baths with dimensions up to 300 adjusted cubic feet (ACF).

The Amerec AK9 steam unit is equipped with a stainless-steel tank, professional-grade heating elements, electronic water-level control system, modular snap-in control connections, and a variety of other innovative features.

Amerec AK Series steam generators are engineered to power the most demanding home and commercial steam room environments. The high-efficiency Amerec AK9 steam shower generator is crafted of corrosion-resistant stainless-steel for years of safe, reliable operation.

The Amerec AK9 is designed to provide bathers with the most pleasurable and comfortable steam bathing experiences. The unit features a uses a Sequential Temperature Control which delivers an even flow of soft steam each bathing session. The AK9 steamer’s heating elements are engineered for easy and economical service.

The compact AK9 steam shower unit installs conveniently out of sight. Typical installation locations include cabinets, closets, and vanities.

The Amerec AK9 9kW steam generator is available in 240V or 208V  and can be field wired for single-phase or three-phase configurations for flexibility. Homeowners, day spas, and health clubs rely on Amerec AK Series generators for low cost, efficiency, and durability. Amerec AK generators are engineered to deliver energy-efficient steam production each bathing session.

Amerec AK series residential steam room generators can be linked in tandem to accommodate steam showers up to 1500 adjusted cubic feet to meet all your steam shower size needs. Connection cables are sold separately, and each generator requires a comfortFlo steam head.

The Amerec AK9 steam bath generator carries a limited lifetime warranty and is fully serviceable. Amerec AK Series home steam room generators are UL, CSA, and CE listed to ensure your safety and give you peace of mind.

SteamSaunaBath is proud to be an authorized Amerec partner and offer the best steam showers from Amerec for homes and health clubs.

We guarantee the lowest price. If you see Amerec steam showers for sale at a lower price, give us a call, we’ll beat it! See our guaranteed price policy for details.

SteamSaunaBath is the bathing environment expert. We specialize in steam room and sauna design, sales, installation, maintenance, and repair services. Our half-century of hands-on experience means that we are uniquely qualified to ensure the success of your bathing space and an unparalleled steam bathing experience. Contact a SteamSaunaBath technical bathing specialist to help you build your steam room: (800) 707-2862.

  • Sequential temperature control for soft steam
  • Stainless steel tank
  • Industrial grade, serviceable heating elements
  • Durable electronic components
  • Electronic water-level control system
  • Low voltage safety control circuits
  • Available Auto Drain automatic draining system
  • Ability to field wire phase for 1-phase or 3-phase
  • Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
  • Full 3/4" port drain valve
  • ASME safety valve
  • UL/CSA/CE listed
  • 9kW steam bath generator
  • Installation and operation manual
  • Limited warranty
Swipe horizontally to reveal full table content.
Model AK9
Minimum Adjusted Cubic Feet 150
Maximum Adjusted Cubic Feet 300
Shipping Weight (Lbs.) 35 lbs
Kilowatt Rating (KW) 9 KW
Water Supply Connection 3/8" Compression Connection
Generator Steam Line Connection 1/2" NPT
Steam Head Connection 1/2" NPT
Drain Connection 3/4" NPT
Safety Relief Valve Connection 3/4" NPT
Safety Relief Valve PSIG 10 PSIG
Control "Rough In" Cut Out 2-3/8" Diameter
Generator Control Connection 8 Pin, Snap-In Connector
Generator Control Cable 25', 8 Conductor, 28 AWG, Shielded Cable
Control Sensor "Rough In" Cut Out 7/8" Diameter
Control Sensor Cable 25', 2 Conductor, 22 AWG, Shielded Cable
Width In Inches 16-1/2"
Depth In Inches 6-1/4"
Height In Inches 15"
Required for Operation
K2 Operating Equipment Package, AK Series
Model
Glacier
SKU
9036-156

Glacier K2 Operating Equipment Package for AK Series Generators. Includes steam head.

MSRP
$1,550.00
Your Price
$1,085.00
K3 Operating Equipment Package, AK Series
Model
Columbia

Columbia K3 Operating Equipment Package for AK Series Generators. Includes steam head.

OUT OF STOCK

K2 Digital Control Package, AK Series
Model
K2
SKU
9114-106

The Amerec K2 steam shower generator control kit works with Amerec AK series steam generators. Wi-Fi and Smart home ready, this control features adjustable time, temperature and a 24 hour delay and includes a ComfortFlo steam head. 

6 different Trim Ring/Steam head finishes for the K2 control are available.

MSRP
$900.00
Your Price
$630.00
K3 Digital Steam Shower Generator Control Kit, AK Series
Model
K3

The Amerec K3 steam shower generator control kit works with Amerec AK series steam generators. This control kit is able to be mounted inside or outside the steam room and features a digital control, remote sensor and includes a ComfortFlo steam head.

6 different Steam head finishes for the K3 control kit are available.

OUT OF STOCK

KT3 Digital Steam Shower Generator Control Kit, AK Series
Model
KT3

The Amerec KT3 steam shower generator control kit works with Amerec AK series steam generators. A stylish update to Amerec's KT60 control, the control is backward compatible with the classic KT60. Featuring a built-in temperature sensor, this control was designed for use inside the steam room. With the simple ease of 3-buttons, you control on/off, temperature, and time duration settings. The display alternates every 5 seconds between atmospheric room temperature and the remaining time of your steam session. With maximum session settings of up to 125 °F and 60 minutes (residential use), this control kit includes a ComfortFlo steam head.

6 different Steam head finishes for the KT3 control kit are available.

OUT OF STOCK

K4 On/Off Non-Thermostatic Control, AK Series
Model
K4

The Amerec K4 steam shower generator control kit works with Amerec AK-series steam bath generators. This control kit may be mounted inside or outside the steam room and features a non-thermostatic control and includes a ComfortFlo steam head.

Choose from 6 available designer finishes for the ComfortFlo steam head.

OUT OF STOCK