Steamist AHE-0017-2A
Heating Element, 12KW 240V 3PH
The heating element resides in the pressurized vessel which is responsible for boiling water to create the vapor and is used on steam bath generator model HC-12 (Single Element) and HC-24 (Dual Element with serial number up to E-39999).
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
THIS PRODUCT IS NO LONGER AVAILABLE. PLEASE SEE OUR SELECTION OF STEAMIST STEAM PARTS.
The heating element has a copper sheath with a steel flange and comes with a graphite gasket. Stamped on the flange is the voltage and kilowatts.
A common reason for a failed element is lime build-up in the tank and water probes. We suggest having a water treatment system in place along with a routine preventative maintenance program to extend the life of the heating elements.
When replacing a heating element, always use a new gasket. Steamist gaskets do not need compound but if you choose to use it, make sure to use a compound rated to at least 300 degrees F.
It is a good idea to have extra gaskets on hand for preventative maintenance cleanings and an extra element on hand to reduce down time.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
| Model | AHE-0017/2A |
|---|---|
| Voltage | 240V |
| Kilowatt | 12KW |
| Phase | 3PH |