Amerec DSNR-45S

Designer S Series 4.5KW Sauna Heater

Model
DSNR-45S
SKU
9053-302

The Amerec Designer S Series DSNR-45S 4.5 kilowatt sauna heater with built-in controls is engineered to power sauna rooms up to 210 cubic feet (CF).

Must order SC Control Separately.

MSRP
$1,400.00
Your Price
$1,120.00

The Amerec Designer-45S 4.5-kilowatt sauna heater is engineered to power sauna rooms with dimensions up to 210 cubic feet (CF).

 

A leader in sauna heater design, overall performance, and durability, the Designer-45S blankets the sauna with waves of intense, penetrating heat. The unit is crafted of corrosion-resistant stainless-steel and equipped with industrial-grade heating elements for years of reliable and worry-free operation. The heater features a large rock capacity for a more even and consistent heat.

 

The Amerec Designer-45S is available in 240V single-phase and 208V three-phase configurations.

 

The unit requires the use of a SC digital control for operation. Select the available control with features that best suit your bathing preferences.

 

The Designer 45S features a limited lifetime warranty, and unlike cheaper units, is fully serviceable. Amerec electric sauna heaters are UL listed to ensure safety and quality.

 

SteamSaunaBath is proud be an authorized Amerec partner and offer the full line of Amerec sauna heaters.

 

We guarantee the lowest price. If you see a lower price advertised for this item elsewhere, give us a call!

 

SteamSaunaBath is the bathing environment experts. We specialize in sauna and steam room design, sales, installation, maintenance, and repair services. Our half-century of hands-on experience means that we are uniquely qualified to ensure the success of your bathing space and an unparalleled sauna experience. To contact a SteamSaunaBath Bathing Specialist, call: (800) 707-2862.

NOTE: Additional Freight Charges May Apply.

  • Wall-mounted
  • Stainless steel construction
  • Industrial grade, serviceable heating elements
  • Operates with SC Series Controls
  • Exceptionally large rock capacity
  • Direct rock-to-heating element contact
  • UL listed
  • For sauna rooms from 100 to 210 cu. ft.
  • 4.5KW Heater, 23”H x 16-1/2”W x 11”D
  • 50 Lbs. of Olivine sauna stones
  • Installation Manual
  • Limited Warranty
Swipe horizontally to reveal full table content.
Model DSNR-45S
Shipping Weight 85 lbs
Minimum Cubic Feet 100
Maximum Cubic Feet 210
Kilowatt Rating 4.5 KW
Electrical Data by Voltage/Phase Selected Heater Electrical Chart (see pdf)
Width 16-1/2"
Depth 11"
Height 23"
Required for Operation
Sauna Control - On/Off/Timer & Temperature, SC-60/C103-60
Model
SC-60
SKU
9201-231

Sleek, flush mounted design with satin stainless steel face plate, the Amerec SC-60 sauna control panel is a wall-mounted sauna control with a 60-minute timer, lightswitch, adjustable thermostat control, and heat indicator light. 

Must use with CB7 contactor for selected phase (sold separately).

 

MSRP
$630.00
Your Price
$420.00

9 hour Pre-Set Timer & Temperature Control, C103-9/SC-9
Model
SC-9
SKU
9201-221

Sleek, flush mounted design with satin stainless steel face plate, the Amerec SC-9 sauna control panel is a wall-mounted sauna control with a 60-minute timer with 9 hour time-delay for startup, lightswitch, adjustable thermostat control, and heat indicator light.

When used with Floor Heater models requires use with CB7 contactor for selected phase (sold separately).

MSRP
$630.00
Your Price
$420.00

On/Off & Temperature Control, C105-P/SC-Club
Model
SC-Club
SKU
9201-119

Sleek, flush mounted design with satin stainless steel face plate, the Amerec SC-Club sauna control panel is a wall-mounted sauna control with on/off switch for club use with attendant on duty (no timer), lightswitch, adjustable thermostat control, and heat indicator light.

When used with Floor Heater models requires use with CB7 contactor for selected phase (sold separately).

MSRP
$630.00
Your Price
$420.00